ode膜片式電磁閥,ODE膜片式電磁閥規格
So if the pressure difference is greater than the maximum
Has designed the value of the solenoid valve,
The latter does not turn on even when the coil is energized.
For the correct operation of the solenoid valve,
Damage to other parts of the solenoid valve.
There must be a minimum value in this solenoid valve
The pressure difference between the inlet pipe and the outlet
To ensure the normal function of the solenoid valve. however,
Excessive pressure difference between inlet and outlet,

ode膜片式電磁閥,ODE膜片式電磁閥規格

Is desirable, once the valve is closed, the actual flow is not higher than Kv (ie:
Flow through the valve, the pressure loss is 1 bar).
Therefore, if the valve opens when the inlet pressure is higher than 1 bar, that is
It is not advisable to use a valve with a free outlet, ie no export restrictions
The pressure drops to a value of 1 bar.
In addition, the design of the hydraulic circuit must pay special attention to the problem
Water hammering may cause overpressure, such as tearing the diaphragm or

,ODE膜片式電磁閥規格